How to Remove Toe Cages for Peloton Bike?

Sometimes people from my following asked this question: How to Remove Toe Cages for Peloton Bike?

When I search online I have also seen that a lot of people are asking the same questions to different groups and forums. So, I have decided to write a detailed guide on how you can remove toe cages for the Peloton bike.

Here we go:

How to Remove Toe Cages for Peloton Bike?

How to Remove Toe Cages for Peloton Bike?

Have you ever install toe cages on your Peloton bike? If so, you know it all! It’s just the opposite. In case you don’t know, here is the guide on how you can do this:

Required Tools:

We only need an Allen wrench (Metric 5mm) to remove toe cages. It’s a type of wrench that you use for screwing and unscrewing different bolts. Or, you can go with the Allen key set (also known as a hex key, Torx key, or Allen wrench).

Step-by-step instructions:

So, here we go! Just follow these five simple steps and you’ll be able to remove toe cages for the Peloton bike in no time!

Step 1: Don’t ride on the bike

At first, you need to take yourself off the bike. This is very important. If you don’t do this, the chain of the bike will be ruined, as well as the inner wheels.

Step 2: Remove Straps

There are two straps that you need to remove. They are located on either side of the bike. To remove them, you will need to loosen the strap and pull them up.

How to Remove Toe Cages for Peloton Bike?

Step 3: Locate Cage Bolts

You will need to locate cage bolts that are underneath the straps. So, you need to push your fingers deep inside the straps. Once, it is done, go to the next step.

Step 4: Unbolt the Bolts

From my personal experience, the bolts on the chains tend to be easy to pull out. Use the Allen wrench to remove it.

Step 5: Remove the Cage

The cage itself is very easy to remove. Just push your fingers under it and lift it! The chains will go with it, so you don’t need to worry about them.

Why do you need to remove toe cages for the Peloton bike?

Why do you need to remove toe cages for the Peloton bike?

Replacing the old toe cage is only the primary reason why you need to remove toe cages for the Peloton bike. But there are some other reasons too, like:

Reason #1: To prevent injuries from an old toe cage

When a toe cage is old and slightly broken, it may cause some problems that can lead to some serious injuries. This is because it does not allow the rider to feel what is on top of the bike and what he/she may hit when they are riding.

Reason #2: To prevent the chain from getting broken

When you have broken the chain of your bike, it’s very annoying and you need to remove your Peloton toe cage to replace the chain.

Conclusion

After reading the article you know that it’s very easy to remove toe cages for Peloton bikes. It takes only a few minutes and you will be able to complete the process. You also know why you need to remove toe cages for the Peloton bike and I hope that everything is clear now!

If you have any questions, feel free to ask me in the comments!

If you liked this article, please share it with your friends! Thank you!

Related Articles:

Leave a Reply

Your email address will not be published.